Полуприцеп контейнеровоз Krone SD

WhatsApp показать контакты

T 000.100 Without country symbol sticker
T 001.328 Lettering on name plate: Typ: SD, certificate no.
e1*2007/46*0232
T 001.339 without specifying the national registered masses on the
manufacturers plate
T 001.000 TÜV standard approval:
T 001.100 Max registered king pin load: 14.000 kg
T 001.200 Max registered Axle load: 27.000 kg
T 001.300 Allowable gross vehicle weight: 40.000 kg
T 001.040 Max technical tow bar load: 14.000 kg
T 001.057 Max practical axle load: 27.000 kg Gross vehicle weight:
41.000 kg
T 500.001 Suitable for towing vehicle according to ISO 1726
T 002.301 5th wheel height unloaded: 1.020 mm
A 100.102 Double T-longitudinal beams with cross members in welded
construction
A 100.114 Step frame 120 mm
A 100.090 Chassis with pneumatic extendable rear and manual
extendable front
A 100.391 Front extension with devices to locking from below
A 100.305 Neck height: 130 mm, (incl. king pin plate)
A 100.187 Interchangeable 2'' kingpin, 2 positions overhang: 654 and
954 mm, mounted on 954 mm
A 100.076 Extractable Rear bumper according to EC-regulation,
A 100.072 Side guard
A 100.377 Side guard 410 mm high
A 100.375 Side guards/pallet box cove without Krone label
A 420.000 Container lockings units supporting following container
types:
A 420.101 1 x 40' Container with tunnel
A 420.152 1 x 45' Container with tunnel
A 420.110 2 x 20' Container
A 420.140 1 x 20' Container lockings rear position
A 420.120 1 x 20' Container centred
A 418.004 additional container locking for 30' container flush with
rear
A 420.122 Attention: Transport of full tank container is not allowed
A 420.123 Attention: Container position 20' in centre position
limited to 30 tons
A 420.128 During transport of 45' containers with short tunnel the
allowed length from the king pin to the rear is exceeding
legal limits!
A 420.129 The transport of 45' containers with long tunnel and
chamfered corners at front is possible within the EC
directive. The rear bumper must be pulled out manually!
A 419.001 Height adjustable container lockings and foldable supports
(for transport of 40' and 45' container without tunnel)
A 421.010 Distance kingpin - rear end: 12.000 mm at 45' containers
with long tunnel 12.760 mm at 45' containers with short
tunnel
A 100.029 2 rubber impact buffers at rear, central
A 100.340 Spacer plate as support for the impact buffer
A 165.003 Chequered steel plate, at rear between beams
B 028.004 # 2 mechanically operated landing legs, 2x12 tonnes
# capacity, semicircular with base plate, Brand: Jost
# Series: Modul B
# [TO TRANSLATE!!!]
B 001.000 Landing legs operated from right side
Axles/Suspension
C 000.004 3 axles each with a load capacity of 9.000 kg
C 143.029 Distance from kingpin to centre of axle unit = 7.915 mm
C 100.020 Axle distance: 1.410 / 1.310 mm
C 075.336 SAF axles with air suspension and Intradisc plus disc
brakes, Offset 120
C 075.965 Disc brake: Integral
C 075.960 Disc brakes 370 mm
C 043.110 With raise and lower valve, including auto reset valve, in
lowering position with fixed position
C 145.060 # SAF TIRE PILOT - Tyre Inflation System
# [TO TRANSLATE!!!]
Tyres (rims)
D 410.035 6 x 435/50 R 19.5, brand Goodyear
D 185.100 Without spare wheel
D 130.091 tread: Goodyear KMAX (M+S)
D 500.002 Integrated Vehicle Tire Pressure Monitoring (IVTM), WABCO
(CAN-Connection from Trailer to Tractor ECU) * without
display at the trailer
Spare wheel carrier
E 070.000 Without spare wheel holder
Mud guards
F 002.010 Wheel covering according to EC-regulations
F 010.001 Spray suppression according to EC guideline
Brakes
G 000.103 Brake system according to ECE R 13 (incl. stability system)
G 082.000 Spring parking brake
G 079.002 Brake air pipes below beam level
G 102.010 Diagnostics by ISO7638 plug connection (EBS supply cable)
G 039.008 4 wheel chocks with holder
G 071.000 Standard ISO 1728 coupling (Palm)

G 088.520 Braking system, brand: Wabco
G 121.001 Brake lining wear information via EBS, displayed in drivers
cab
G 088.500 Attention: The trailer is only allowed on towing vehicles
with compatible braking systems!
G 085.100 EBS-braking system, 2S/2M, 2 sensors on 1 axle
Light
H 000.001 Lights according to UN ECE Regulation No. 48
H 070.005 2 LED outline marking lights with rubber-arm
H 071.010 LED Side marker lights
H 007.003 Electric connections below upper beam level
H 001.000 24 volt, at front, with 7-channel power socket DIN ISO 1185
H 080.000 7-channel-power socket DIN ISO 3731 at front, for add.uses
H 060.001 Additional 15-channel-power socket at front; DIN ISO 12098
H 060.025 socket layout with 15 pins, 9-wired main cable
H 005.110 Multi functional rear lights, brand: Hella
H 031.001 Including 1 fog light
H 021.001 Including 1 reverse light
H 045.027 2 number plate lights (LED)
Accessories
I 010.002 2 warning plates ECE-R70 (r./y.), 565x200 mm, on rear bumper
I 017.000 1 Orange warning plate(s), foldable (without number)
TÜV-Approval
Z 010.002 Approval of the EC certificate of conformity according to
Annex IX of Directive 2007/46/EC approval:
e1*2007/46*0232*13
Z 000.001 registration certificate of vehicle part II
Painting
X 000.020 Type: paint finish 40'- chassis
X 022.000 Series painting (one colour)
X 001.002 Steel parts are shot blasted, CDC-primer coated and powder
coated
X 090.022 Fleet number, 70 mm high, 2-sides
X 056.010 [TO TRANSLATE!!!]
X 056.039 White, reflective line marking on both sides, on chassis
ECE-R48, trailer type approved
X 056.055 red, reflective line marking on chassis rear, ECE-R48
X 122.010 Trailer labelling according to design
1. Farbgruppe Fahrzeuge: 1
Position 10040
X 122.000 labeling
X 122.000 -Chassis
X 600.001 Clearing Labeling over the customer is nessessary
X 600.000 Designnumber: 24729
X 998.107 Chassis RAL 6017 MAY GREEN
X 998.130 Axles including hub RAL 9005 JET BLACK
X 998.242 Rear bumper/light panel WHITE POWDER COATED
X 998.890 Attachment parts BLACK OR GALVANIZED
X 998.212 Rims SILVER NATURE
X 998.272 Side guards WHITE POWDER COATED
X 998.831 Landing legs RAL 9005 JET BLACK