Грузовик платформа Volvo FH 540 8x2 Crane truck w/ 2021 165 t/m HIDROKON crane w/ jib and

Eu-approved until: 21.02.26
Suspension on 1st and 2nd axle: Steel
Suspension on 3rd and 4th axle: air
EU approved until: 21.02.2026
crane certified until: 6325
Technical approved
Specifications
Euro 6 engine
2 x 110 liter variable pumps
2 x manual extensions for main boom and 2 x for jib
Scanreco optical remote control (Top model)
Weight cell main boom
Extra function for main boom and jib
Auto leveling (The car puts itself in a level position ready for lifting.)
Virtual room (Possibility to limit all axes with a few keystrokes
no need to go to a workshop for this. Brilliant when working under high voltage etc.)
SKF central lubrication of the crown and up to the first joint
Extra function fully extended on jib
Single winch hook (Jib / main boom)
2-part winch hook (Jib / main boom)
4-part winch hook (Main boom)
Hook for jib
Hook for main boom (Large hook)
Emergency lowering unit (24 volts)
Wire stop sensor and sleeve
4 ton winch
Diagnostic cable for online help (Remote help)
Danfoss valve center
2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed
and these can be removed as needed)
Front support leg
Construction
4 x work lights strategically placed inside each support leg cabinet
50" LED bar work light rearward on the cabin
Powerful LED lamps in the crane
VBG mount
with air servo control unit mounted in the rear cabinet left side
Bracket on the roof
2 pcs high beam LED bar on the roof forward (daylight!!)
Orange work warning LED beam on the roof
EasyUp foldable ladder in the side with railing
Boxes for chain
chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving
Charger for control in the cabin
Plastic internal screens axle 3 and 4
3 edge pull-out cabinet between axle 3 and 4
On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc
Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly
with rounded edges for a very professional send
CNC manufactured plates up the rear edge of the cabin
Fully painted sides
cabin and stern
Resting cradle for crane for driving without jib
5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level"
Right side large cabinet 1.2 x 1 meter
Powerful LED back / work lights at the rear
Rear part of the car rebuilt with CNC manufactured plates
and beautiful LED taillights have been installed in several stages
Hatches strategically placed for access to relevant devices under the bodywork
Precisely cut out fields in the side coverage for access to the screen
emergency lowering functions etc
Marker lights along the side mounted so that they flash together with the turn signals / direction indicators
Cradle to hold the jib when not in use
Hydraulic extra function dismantled main boom and jib
but mounted if desired
Kettle in cabin
Microwave oven in cabin
Light
Ready for delivery
Description
We have a 2021 Volvo FH 540 8x2 Crane truck w/ 2021 165 t/m HIDROKON crane w/jib and winch and lots of equipment for sale
The car appears new and has hardly been used. All services have been done at a brand workshop
There are 8 hydraulic extensions on the main boom and 6 hydraulic extensions on the jib
Everything works as it should according to the owner
MUST SEE!
Ready for delivery